admin

The Durag: From Political Statement to Fashion Statement

/in /by

The origins of durags can be traced back to the 19th century during the days of slavery. One theory is that slaves with light complexions were forced to wear durags so that they would not be mistaken for being White while out in public. A more common theory is that durags were worn by slaves to control their hair throughout the day. While the first stories of durags were racially charged, they have been widely popularized into fashion accessories by all cultures. Durags became mainstream during the Harlem Renaissance by African Americans as a way to preserve hairstyles after the hair was chemically straightened. Also used as a means to cover hair while in between hairstyles, durags were viewed as a necessity long before being viewed as fashion.

Durags are commonly made from polyester to protect hair from getting tangled or unruly. Available in a wide variety of colors, durags either have elastic sewn all around the edges for a snug fit or have two long ends that are hand tied in the back. The shift from necessity to optional fashion occurred during the 1960s Black Power Movement when durags became a political statement of identity and unity.

Within the 1990s, durags emerged as a fashion staple for the urban youth along with baggy pants and bold colors. Durags are marketed towards men, but women also use them to maintain their hairstyles at home and while sleeping. The most popular hairstyle that durags are used to protect is the finger wave. The finger wave is a method of creating waves in short hair using ones fingers, hence the name. The finger wave hairstyle is seen as an art form by hair enthusiasts and requires a durag to maintain the difficult style during activities such as sleeping and playing sports.

People from all different backgrounds can wear a durag as they are available in almost any store that has a Black hair care section and are very affordable. They are also extremely easy to put on and take off. Keep in mind that the fabric is fragile, so hand washing with a mild detergent is all that’s needed to prolong the life of a durag.

There are many ways to wear a silk durag aside from the standard way. They can be worn with the tails tied to the side as opposed to the back. Some people leave the tails completely untied for a loose fit and casual look. Any type of hat can be placed over the durag so that only a small piece of fabric shows. For the adventurous type, silk and velvet durags adorned with jewels and beads can be purchased online. Durags can leave a line across the forehead if worn too tightly so this is something to consider when choosing a method.

Variations of the spelling include durag, do-rag, and durag. The unique evolution of the durag is worthy of being revisited so we can appreciate its roots and look forward to its future.

admin

What is the real purpose of a herb grinder, and what can you use it for?

/in , /by

If you have been given a herb grinder as a gift, but are not quite sure what its’ purpose is or what you yourself could do with it, here are a few suggestions you may find are things you soon love to do.

 

Grind up your marijuana — The main purpose for a custom wholesale grinder or herb grinder is to grind up marijuana, even if the manufacturers often say it is for grinding up herbs you will cook with.

 

This tends to be done for a couple of reasons. First, ground marijuana is far easier to roll into a joint, as the grinding makes the herb finer.

 

Second, some people put their marijuana into bread, brownies, cookies, cakes, puddings and many other dishes. Ground down into a much finer substance, it is easier to mix into a dish, as it spreads through the entire mixture much better.

 

Grinding rosemary, thyme and sage for beef dishes — Many cooks still do not use the classic herbs rosemary, thyme and sage in their beef dishes. Yet many of them should. Especially if the herbs are ground up into a much finer powder.

 

Grind up either rosemary, thyme or sage, or all three of the spices, and liberally add them to just about any beef dish you are going to make.

 

Whether that is a steak, a beef stew, a beef hash, beef ziti, lasagna with beef, or even meatballs or beef stroganoff. All of these dishes are wonderful with these three herbs, and grinding them up with a herb grinder will help the flavors permeate through each dish even more.

 

Grinding Italian herbs for pizza and Italian dishes — Most Italian dishes have a liberal application of herbs added to them. Whether they are pizzas, lasagnas, spaghettis or other typical Italian dishes.

 

Grinding the Italian herbs for a pizza or a lasagna will allow you to sprinkle them liberally all over or into any Italian dish, without your family or your guests having to deal with mouthfuls of small branches and leaves.

 

Use the herb grinder for herbs like Italian herb mixes, rosemary, basil or oregano, and watch your guests’ faces light up in surprise when they taste how fabulous their food now is.

 

Which type of herb grinder to buy? — With several designs of herb grinder on the market, there are a few things you should consider before you buy one.

 

Do you just need a simple herb grinder that will grind both marijuana and any other herbs you are going to use into one type of grind? Or do you need a herb grinder with two or more compartments, so that the marijuana kief can be separated from the rest of the herb?

 

Decide if you will be using the herb grinder primarily for marijuana, or if you will use it mainly for cooking. Once you know how you are likely to use it the most, then you can choose the right model and size for the uses you will put it to.

admin

Epoxy Flooring Is Not Only For Your Garage

/in , , , /by

Deciding to have epoxy floors laid in your garage is nothing out of the ordinary. After all, many people have epoxy floors laid in their garages due to the ease of installation and how durable it happens to be.

For many people, however, the garage is the only place they think of when they think about having epoxy floors installed. In fact, epoxy has many other uses as well and can easily be done for you by an experienced contractor like epoxy floors Texas.

Having epoxy floors laid in your kitchen — Having an epoxy floor laid in your kitchen is a good decision for many reasons.

First, you can have epoxy stained to any color you like so it will always match your kitchen cupboards and appliances.

It is also fast to pour and quick to dry, and it can be buffed to a high polish. This gives your kitchen an upscale, expensive look without you having to pay the higher prices an upscale flooring would cost.

Finally, it is also durable. This means, even if you drop food or other kitchen related materials on the epoxy floor you have in your kitchen, it will not stain or scratch.

Epoxy flooring in bedrooms — You may not think about the use of epoxy for a bedroom floor, but it is actually becoming very popular for just this thing.

This is often due to its durability, especially in children’s rooms, as well as the ability to have an epoxy flooring stained any color you like. This means you can have flooring that perfectly matches your curtains, wallpaper and paint and even furniture, bedding and pillows.

Epoxy floors in bathrooms — Epoxy can also be perfect for bathrooms. After all, it can be buffed to a high-gloss shine, and is completely waterproof.

This means you do not have to worry about any flooding coming from a bath, shower or toilet. Nor do you have to worry about it getting scratched due to it being a high-use area.

Epoxy in office buildings — An epoxy flooring is often what companies now ask for when moving into new premises.

Epoxy can look quite industrial, which is perfect for modern companies. It also does not require huge numbers of carpets or rugs to cover it, and it is durable when it comes to office furniture being often moved around on it.

It also looks upscale, which is often what companies want their clients to see when first entering their office space.

Epoxy floors in warehouses — Epoxy is particularly popular in warehouses and industrial spaces due to its high level of durability.

Epoxy is also oil, stain and water-resistant, which is another huge plus for its use in a warehouse or industrial area. It is also chemical resistant, which is a huge bonus in a manufacturing plant or in print shop or other company where chemicals are often used.

As epoxy is very easy to clean, this also makes it even more popular in highly trafficked industrial areas. Especially in areas where chemicals, oil or anything that may be spilled is used frequently.

admin

What is Plastic Surgery and How Do I Find A Surgeon?

/in , /by

Plastic surgery is one of those trends that’s been getting more and more popular as the years go by. Many people are choosing to get one of these surgeries and some people even get multiple ones. With that being said, most people aren’t sure exactly what plastic surgery is or how they actually find a good surgeon. This article is going to help explain all that!

What is Plastic Surgery?

Plastic surgery is just any procedure that repairs or replaces parts of the body. Often times, they can use existing parts of the body and not have to use foreign bodies, which reduces the chance of rejection. This type of surgery can usually be elective or a result from injuries.

What are Common Procedures?

There are a ton of different types of plastic surgeries. There are too many to list here, but we’ll look at a few of them.

  • Face Lift: It takes all the skin on the face and lifts it up.
  • Breast Lift/Implants: It makes the breasts bigger and less saggy.
  • Rhinoplasty: Reshapes the nose.
  • Liposuction: It sucks out fat from the body.

What Should I Consider Before Having Plastic Surgery?

Before you decide to get plastic surgery done, there are some things you want to consider. Not only will this help you make sure you’re making the right decision, but it will also help ensure that you know what to expect going in!

Price

For starters, you want to consider the price. While different places charge different amounts, you don’t want to go with someone who is priced too low. Keep in mind, various procedures should be in a certain price range. Most of the time, if the price is too low, the doctor isn’t very good.

Healing Time and Process

You want to make sure you know what the healing time and process will be for the procedure you will be getting. Some procedures might have longer healing times and more care instructions than others, so you want to be sure that you can handle them.

Risks

With all surgeries, there are going to be risks. Since these are usually elective procedures, there’s a chance that there could be more risks than a normal surgery. Another thing to keep in mind is that your body might reject implants or the procedure might not stick.

Consultations

Finally, you want to try and get at least 2 consultations, from different doctors if possible. This will help you be sure that your anatomy can handle the procedure and you have a good chance of getting the results you’re looking for.

How Do I Find A Good Plastic Surgeon?

To find a good doctor, there are a few things you can do. For starters, you can look at reviews from real customers. This will give you a pretty good idea of how the doctor is. You can also look at the American Society of Plastic Surgeons to check the doctor’s stats and info.

Now that you know some more about plastic surgery, you can decide whether or not it’s something you’re interested in. While it can boost your confidence and help take care of areas that you consider problematic, you have to make sure you do your research and find a plastic surgeon Austin TX that won’t completely botch the surgery!

admin

Excellent Beard Trimmers 2018

/in /by

Beard trimmers are handy tools to keep the beard more manageable. And while there are a lot of electric shavers available in the market nowadays (check www.gazblogs.com), three of the best ones that have been tested are going to be described and detailed below.

How Best Beard Trimmers are Chosen

Keeping one’s facial hair under control is not new to those who lead a bearded life, and are aware of the fact that it takes a specially crafted shaver to sustain the effort given in growing one’s fuzz. The shavers listed here have been meticulously tested and compared with each other in terms of how easy it was to clean the gadget, the accessories that are included with it, how effortlessly it can be adjusted for the needed length, and how consistent each one could cut.

Babyliss Super Beard 7897U

The Super Beard is easy to operate, and provides an even cut for efficient trimming. Although it doesn’t have a travel case and sometimes would leave an odd stray hair in place, but overall it does a very good job.

It is equipped with a lockable adjustment for length that can be adjusted from 1mm until 15mm that allows you to lock the comb guard in position prior to shearing that helps prevent being unintentionally clean-shaven. It trims efficiently by raising hairs for a consistent length without minimizing its thickness.

And out of the three shavers presented here, the Super Beard 7897U provided the best even cut

Remington MB4045 Beard Kit

The Remington MB4045 provides an even cut, has a great value including a clean cut range. The underside, if you can call it that is this trimmer is designed with a plastic-like frame, and its combs are attached by using pins.

The MB4045 is quite durable when handled; however, the switches and dials feel more or less like they were made of plastic. The combs that came with this shaver is a mite difficult to put in place and its teeth have more flex to it than necessary that could lead to having a jagged cut if it is pressed harder on the face.

This beard kit comes with two combs with tiny pop-out blades intended for accurate trimming.

Panasonic ER-GB96

The Panasonic ER-GB96 has a superb cut range with a steady cut length, as well as a washable body but is quite expensive.

If you prefer a lumberman appearance then the Panasonic ER-GB96 is for you. It has three thick plastic comb accessories and the biggest of the three deals with any serious fuzziness. It is steeply priced; however, this fuzz trimmer gives off an appropriate heavy-duty feel. The rotating barrel allows for switching the location of the comb.

This beard trimmer can manage even the utmost imposing beard, handling facial hair lengths from a range of 1mm to 30mm.

Other Recommendations

Purchase a beard trimmer that has a long battery life, and if you intent to use it inside the shower better get the waterproof ones that are likewise easier to maintain and clean.

admin

What hunters should consider before purchasing a thermal scope

/in , , , /by

Introduction

Hunters are looking for ways that they can see through rain, snow, and fog to find their target more effectively. This will allow them to more accurately take down game and provide food for their families. Long gone are the days when hunters simply rely on their eyesight alone when it comes to trying to spot game in densely wooded areas. Thermal scopes have become increasingly popular with hunters because many of them feel as if it gives them the advantage that they need to be able to see better than they would be able to with a traditional scope. Four areas of concern that should be taken under consideration when it comes to purchasing a thermal scope for hunting are price, versatility, and durability.

Price

Thermal scopes come in a variety of price ranges. An entry level scope can be bought for a couple of hundred dollars which will allow the hunter to see the thermal spectrum through it to locate game. It is important to note that many of these entry level scopes have limited optics which will not magnify the field of view as much as they make like it to be. These hunters may want to look at a mid-range or higher price range thermal scope which may offer them not only the magnification that they desire, but it may also have added features such as the ability to take a snapshot of the field of view along with a short video clip. The more features that are available on a thermal scope typically dictates the price of the scope. This means that those hunters who may be looking for a scope that has lots of added features may be paying several hundred to even a thousand dollars for one.

Versatility

Another point to consider when it comes to thermal scopes for hunters is the versatility of the scope. Some hunters simply want a thermal scope that is affixed on their rifle so that they can shoot more accurately; however, there are a growing number of hunters who think that a thermal scope should be more versatile. They may want to be able to easily detach the scope and use it as a spotting scope prior to taking down their game without having it mounted on their rifle. Purchasing a scope that has this feature would be a benefit for those hunters who would like to get the most out of their purchase and, in the end, carry less gear out into the field.

Durability

Most hunters want to make sure that the thermal scope that they purchase is durable. Outside conditions can be very rough on a thermal scope’s housing, optics, and electronics. The best thermal scopes for a hunter would be those that are made from durable and lightweight materials such as aluminum, titanium, or carbon fiber.

Conclusion

What determines the best thermal scopes for hunters can be broken down by the aforementioned qualities of price, versatility, and durability, but ultimately it is the hunter’s choice. Check out cleverhunters.com to get a more extensive overview on nighttime scopes and hunting gear.

admin

How To Apply Artificial Nails

/in , , /by

How To Apply Artificial Nails

A girl is typically always thinking about her personal appearance. I mean think about it, we really can’t help it. The media is always showcasing some doll face beauty to give us a measuring rod on what appears attractive. Therefore, it should not come as a surprise that we are always looking for the next beauty product to help us spice up the looks department.

A lot of us ladies want to make sure that we have the perfect hairstyle. To help us do that, we might run to the salon every other week. However, other girls want to make sure that to have great looking nails.

 

Costs of getting nails done

The costs of going to the nail salon can really add up. The typical artificial acrylic nail set costs around $30.00… not to mention if you want to add a nice design or to. Depending on how elaborate you want to get with your artificial nails, you can easily end up paying $50.00. Also, if a nail chips or breaks, you have to go back into the nail salon to get a repair or a fill. Therefore, monthly, a gal can easily spend over $120.00 on nails alone.

 

Alternative to the nail salon

However, there is an alternative to racking up the bucks in a nail salon. The alternative rests with artificial nail sets.Artificial nail sets range from $7-15 dollars, and can be bought at any pharmacy or local retail shop. The artificial nails have designs, and typically come in any color. The best thing about artificial nail sets, is that they are easily applied. If one chips or breaks, as opposed to having to go to a nail salon and fix it, a girl can just whip out her superglue and she has a fixed nail.

 

How to apply artificial nails

When it comes to artificial nail kits, like kit de uñas acrilicas completo, there is an application use that a girl must follow. In each artificial set, you will typically find: the artificial nails, superglue, and instructions to apply. If the set does not include superglue, you may have to buy the glue separately.

However, once you have set out all the materials in the set, you will then figure out which nail fits each one of your actual nails, and line then up to apply them. Once you have lined out each of the 10 nails that fit, you will start to superglue each one to your actual nail. Be careful, because you do not need to overload your natural nail with glue, in order for the artificial nail to stick. A couple dabs of artificial nail glue is all that is typically needed to get the nail to stick.

Remember, if you want to get your nails done without racking up additional costs, artificial nails are a great alternative!

admin

What are beaded curtains, and are they a good choice for your apartment?

/in , /by

If you own or rent an apartment and you need to buy new curtains, one of the things you may have heard of is bead curtains.

If you have not owned a set of beaded curtains before, however, you may be wondering why so many people like them so much and if a nice set of beaded curtains may be a good choice for your apartment.

What are beaded curtains? — As they sound, these are a type of curtain that is made out of beads.

Beads are threaded onto long strands of string that is then knotted off at the end. Each strand is attached to a top piece that is then hung up like a traditional curtain. The beads then fall from the top piece creating a type of ‘curtain’. This blocks out prying eyes from outside, while still allowing light to shine through.

If you like to have a light apartment, beaded curtains can be a great way to get it. They also look quite beautiful as the light shines through them, as they tend to shimmer almost like gems.

Sizes of beaded curtains — You can buy pairs of beaded curtains for just about any size of window. Just be sure you order a pair that are the correct size.

You can also order a single beaded curtain to hang in a doorway as a type of door. This is a wonderful use of a beaded curtain, as it blocks of one room from another without darkening each room like an actual door often does.

These are the most popular types of beaded curtains, and are often used in stores and restaurants as they allow prospective customers to see into the establishment without allowing flies and other bugs to fly in.

How to choose the right beaded curtains — If you have decided to try beaded curtains in your apartment, there are a few things you will want to look at to be sure you choose the right ones.

Size, of course, is the most important thing so be sure to measure your windows carefully before you place an order.

Next, you will want to consider the color of beads that will look the best in your room, as well as if you want to buy plain glass beads or those with a pattern.

Also look carefully at the top of the beaded curtain. Some are quite plain like a typical curtain, while others have patterns and designs on them. Be sure whichever curtain you choose has a top piece that will fit in with the decor of your apartment.

Where to buy beaded curtains — The easiest place is to look for what you want on the Internet.

Not only will this give you access to thousands of home stores across the United States selling beaded curtains, you will also be able to look at suppliers in India, Thailand, China and other parts of Asia.

As these countries are where many of these curtains are made, you will often get the lowest prices here as well.

admin

What is end of lease cleaning for a rental home?

/in , , /by

When you get ready to start moving out of a rental home, and either into another one or into your own home, one of the things you may hear about is end of lease cleaning.

What is end of lease cleaning for a rental home, and should you pay to get it yourself?

What is end of lease cleaning? — This is cleaning that is done by a cleaning service that specializes in cleaning homes when a tenant is moving out.

These cleaning services come to your former home on a mutually agreed upon time and clean it thoroughly. Their goal is to clean it to such an extent that you get all of your initial deposit returned by your landlord with no problems at all.

Why you should hire an end of lease cleaning company? — Hiring a company that specializes in end of lease cleaning is smart for several reasons.

First, they will do the in depth, deep cleaning job you probably do not want to do. Not if you do not like dealing with ingrained dirt and grime.

Secondly, they will also clean places you may not have thought of cleaning, but places that will be those a typical landlord looks at when he decides if he is going to refund your whole deposit or not.

Finally, they will also save you time and effort, and allow you to spend your time preparing your new home rather than back at your former home on your hands and knees cleaning the kitchen floor.

What should a typical end of lease cleaning include? — When you choose a cleaning service, there are a few things a typical cleaning should include.

First, they should tell you what they will clean in your former home. This should include all rooms, all floors, all doors, windows and windowsills. It should also include the bathroom and the kitchen, and all your kitchen appliances both inside and out. It helps to keep certain things already clean, check out these little tips to help speed up the process and keep costs down a bit:

In some cases, it may even include an in depth cleaning of your garage and any sheds that may be on the property as well.

How much can you expect to pay? — There are usually two ways to pay for end of lease cleaning.

The first is on an hourly basis and will include a payment per hour for each cleaner that comes to your home.

The other way is by paying for an all-inclusive package of cleaning services. This is a package that guarantees both what will be cleaned and how much the entire clean will cost you.

If you have a larger home, or a home that really does need an in depth, deep cleaning, then paying for an all-inclusive package may get you the better deal.

If you are just going to need a typical end of lease cleaning, however, then you may end up paying less if you pay per hour per cleaner.

Most services will cost between $200 to #300 for typical apartment, and between $400 and $500 for an average size house.

admin

What are the best snowboard bindings today?

/in , /by

When people are in the market or snow board bindings there are a lot of choices to consider. All that consumers have to do is take a look at the Internet and they will quickly see that there are more than a few choices that they could consider. Skiers definitely need to make a good choice when they decide to do this because these snowboard bindings are going to be the most important things for determining just how much one can put into their movements when they are on their snowboard.

Arbor Hemlock

The thing that has made people notice Arbor Hemlock is the great amount of variety that this company has when it comes to snowboard bindings. Many people are impressed with what this organization brings because it has snowboard bindings that actually allow people to create a freestyle. This is a big part of the snowboard concept, and people that are on their boards often are definitely going to want the Arbor Hemlock snowboard bindings if they want something flexible. Snowboard users can put their all into their movements and still stay relatively balanced with the sturdy snowboard bindings that are being sold by this company.

Burton Freestyle Snowboard Bindings

Another company is making quality snowboard bindings is Burton. This company has been around for a while, and it has become well-known with people that have snowboards. Many people choose this company because it creates the bindings that are equipped with a flex slider. These bindings also come with a lifetime warranty, which makes them arguably the best snowboard bindings for beginners and people that snowboard on a very regular basis alike.

There are a number of people that are going to appreciate something like this because it allows them to replace their bindings if they ever have a problem. That is why people are willing to pay more for the Burton freestyle bindings.

Compatibility

Customers that go out to look for snowboard bindings find that the big thing that they want is snowboard bindings that are going to be compatible with the major mounting systems. People definitely appreciate the flexibility that comes with these type of bindings because they know that they can change their snowboard and still have bindings that fit on new boards.

Comfort Level

Another thing that seems to attract more people to snowboard bindings is the comfort level. People may initially look at the color and design of the snowboard bindings in the beginning, but it would really come down to is the level of comfort that they can receive once they put these bindings on. That means everything to a person that is going to be doing an extensive amount of snowboarding. People that want to find these comfortable snowboarding bindings are going to pay a little more for this, but most of them do not mind.

The fact that they are going to be able to enjoy the snow and engage in their own freestyle with these comfortable and flexible snowboard bindings makes it worth the price paid.